12 Foot Catboat

12 Foot Catboat
Designed by Edson Schock - Circa 1940's

Follow me as I build a 12 foot catboat from plywood and pine. The boat was designed by Edson Schock in the 1940's. This is a project born of a desire to have another boat to sail here in Puerto Rico that will stand-up to the Trade winds. The sail plan will be changed to a gaff rigged sail. All the lumber is locally bought and pine will be substituted for oak, which is not readily available here. Marine plywood will be used.

Sunday, January 31, 2010

Deck Beams and Mast Step

I began work on the deck beams and have been planing them down to receive the deck and planning ahead a little.
[image]
[image]
There is a lot of details to consider and one thing that I had over looked was to put the mast step in before I put the deck beams in. This is not a problem but I stopped wok on the beams to get it in today.
[image]
This will receive and hold the bottom of the mast.

No comments:

Post a Comment

Followers